.jpg)
Workbench configurator
All data refer to evenly distributed loads. When loading your shelving unit, the shelf load and bay load must not be exceeded. In principle, the current guidelines of the German Social Accident Insurance (DGUV:108-007, formerly BGR234) apply when using our racking. The customer shall be obliged to observe the rules set out therein for assembly and selection of a suitable assembly location, in particular the examination of the floor conditions and loading. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. The dimensions given are approximate and may vary by a few centimetres. Contact us if you need the exact dimensions for your desired shelf.
A workbench for all purposes
Our MFW1000 workbench - a multi-functional workbench available exclusively from TOPREGAL - is suitable for all purposes. If you want to work with tools, use the multiplex board made of robust beech wood and sealed with linseed oil varnish as a support. This support is one of the most frequently chosen equipment for our workbenches. If liquids are handled, the wipe-clean steel support is the best choice. With the practical grating you get an easy to clean support, which is characterized by a robust finish. Our wooden top made of 25 mm thick glued chipboard is the cheaper alternative to our resistant multiplex top.
Workbench Configurator
With the workbench configurator you are sure to find the right workbench for you and your applications. Additional modules and accessories are displayed directly, as summarized here in detail for you:
The optional perforated back panel turns our workbench into a real organiser: tools, machines or even stacking containers or open fronted storage bins can be easily attached to it. We offer two pre-configured accessory sets here in the shop.
Also in the workbench accessories range, we offer integrable tool cabinets and tool drawers as optional modules. The tool cabinets / tool drawers are available in two depths to match the selected workbench. They are lockable and made of robust steel. The doors / drawer pull-outs in blue are perfectly matched to the body in discreet light grey. Inside the tool cabinet there is a shelf that can be hooked in at different heights according to your needs. The second module, the tool drawer, consists of 4 drawers, each of which is supplied with a compartment divider and is also lockable.
Professional tip: You can also integrate these modules into our storage shelves.
Mobile & height-adjustable: The MFW1000
The infinite number of possible uses is not all that the MFW1000 workbench has to offer: The easy-to-fit hard rubber castors turn it into a mobile workbench in no time at all - the castors can also be added later if you have already purchased a workbench, heavy-duty workbench or work table.
Depending on your needs, you can convert the workbench into a mobile or stationary version at any time with little effort.
The working height of the workbench can be optimally adjusted in 5 cm increments by means of a grid. This is why the MFW1000 is a popular purchase when a height-adjustable workbench is required. A further element can also be added to the side if required. Thus it is possible to extend our multifunctional workbench to a row workbench of any length. Just as you wish and need it.
Quickly assembled and transported
Due to the special plug-in construction, the workbench can be assembled and disassembled within a few minutes. This makes the workbench ideal for taking along to any place of use, even in smaller company vans.
Take a look at our short and informative workbench product video!
