Snow shovel for forklift SSG1500, 59.06 in x 42.13 in x 18.9 in, SolidHub

Quickly cleared, permanently mounted

No problem with the robust snow plough for forklift trucks from Steel. With a low weight of 154.3 lbs and compact dimensions (59.06 in x 42.13 in x 18.9 in), the snow plough can be quickly mounted on a forklift truck. Thanks to its working width of 59.06 in and the snow plough's 5-angle adjustable suspension, you can clear driveways, courtyards and larger open spaces in no time at all. The flexible rubber strip on the underside of the snow plough seals the area to the ground, ensuring residue-free clearing.

With the practical support, the snow blade for the forklift can be aligned so that the 5.12 in x 2.17 in forklift pockets are horizontal. This allows you to simply drive into them, tighten the locking screws and lift the snow plough. As the pockets are only 300 mm apart, it is necessary to adjust the forklift forks. In addition, the forklift should be able to push a traction weight of 2 tonnes.

Once the plough is securely mounted and the angle is adjusted, you can begin clearing the area. Transform your forklift into a clearing vehicle with the practical snow plough from SolidHub.

Note:

Please note that the use of the attachment shifts the centre of gravity of your forklift truck. For more detailed information, refer to the heavy load diagram and the centre of gravity of your forklift truck.
The attachment is not suitable for pallet trucks, but for forklift trucks. Before purchasing, please check whether the attachment is compatible with your forklift truck (fork tine cross-section up to max. 5.12 in x 2.17 in).

Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.